NETGEAR WNDA3200 User Manual page 13

Virgin Media Wireless USB Adapter WNDA3200
• Make sure that the IP addresses and the Windows networking settings are configured
correctly. See the link to
How can I improve the speed of my wireless connection?
You can use the USB cable and adapter that came in the package to position the wireless-N
USB adapter for better wireless communication.
The connection speed can vary depending on the type of USB port on your computer, the
capacity of the router or access point for the wireless network, and the type of Internet
connection. You can view the throughput in the status bar at the bottom of the Smart Wizard
screen.
• If the throughput is 54 Mbps you could be connected to an 802.11g network, or the
wireless-N network could be set with WPA (TKIP) security.
Wi-Fi regulations allow the wireless-N USB adapter to connect only at up to 54 Mbps
when WPA (TKIP) security mode is set on the router. For a faster connection, set the
security for the router as WPA2 or WPA + WPA2 mixed wireless security. Then the
wireless adapter can connect in 802.11n mode.
• If you do not have a USB 2.0 port on your computer, the throughput is limited to the 14
Mbps of the older USB 1.1 standard.
• For more information about connection speeds, see
page 8.
Internet Networking and TCP/IP Addressing: in Appendix B.
Optimizing Wireless Performance
Chapter 3. Troubleshooting
on
| 13