JVC Everio GZ-EX255 Detailed User Manual page 102

Recording
7
Tap "RECORD" and record the face from the front.
RECORD THE FRONT VIEW
RECORD
.
A face is captured to be used on the face registration index screen.
0
Other than tapping "RECORD", you can also record by pressing the
0
SNAPSHOT button fully.
A sound can be heard when recording is complete.
0
To cancel the registration, tap "STOP".
0
When "CANCEL FACE RECOGNITION?" appears, tap "YES" to
return to the normal recording mode.
8
Tap "YES" to continue recording.
CURRENT RECORDING IS OK,
MORE FACE DATA WILL IMPROVE
FACE RECOGNITION ACCURACY,
CONTINUE RECORDING?
YES
.
To proceed to collect face information in the four directions of up,
0
down, left, and right, tap "YES". It is recommended to continue
recording to increase the accuracy of face recognition.
To end face registration recording, tap "NO". Go to step 11.
0
9
Rotate the face slowly in four directions to register the face information.
ROTATE THE FACE SLOWLY
.
Rotate the face slowly while looking at the camera. A sound can be
0
heard when recording is complete for each direction. (4 times in total)
Repeat the step until recording (registration) is complete for all
directions.
Registration of the four directions may fail depending on the shooting
0
environment. In this case, tap "STOP" to cancel recording, then tap
"NO" and go to step 11.
If the face cannot be properly recognized during recording, register
0
the face again.
10
Face the camera with a smiling face.
RECORD FRONT OF SMILING FACE
.
Recording starts automatically. Using the smile % display as a
0
reference, smile such that the value is as high as possible.
A sound can be heard when recording is complete.
0
To cancel recording of smiling face and proceed to enter a name, tap
0
"STOP", then tap "NO" and go to step 11.
102
STOP
NO
STOP
SMILE
STOP
11
Tap "OK".
RECORDING COMPLETED
ENTER A NAME
.
Tapping "OK" registers the recorded face and the screen for entering
0
a name appears.
To cancel the registration, tap "STOP".
0
When "CANCEL FACE RECOGNITION?" appears, tap "YES" to
return to the normal recording mode.
12
Tap on the on-screen keyboard to enter a name, then tap "REG.".
REG.
.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
Up to 8 characters can be entered.
0
How to input characters
0
Example: To enter "KEN"
Tap "JKL" 2 times F Tap "DEF" 2 times F Tap "MNO" 2 times
13
Tap the desired priority level, then tap "REG.".
TOUCH ORDER TO RECOGNIZE
REG.
.
Upon registration, the last number is assigned as the priority level.
0
During face detection, the subject with the highest priority (lowest
number) will be detected.
You can change the priority level of a subject by tapping on the
0
number.
Example: To change the priority level of number 3 to number 1, tap
number 1. The priority level of the registered subject becomes
number 1, while the priority levels of the original number 1 and the
ones below drop by one place. (In this example, the original number
1 becomes number 2, and the orignal number 2 becomes number 3.)
When "REG." is tapped, the registration complete screen appears.
0
REGISTERED
.
Tap "OK" to complete the registration.
0
You can edit registered face information in "EDIT".
0
"Editing the Registered Face Information" (A p. 104)
OK
STOP
DELETE
CANCEL
KEN
STOP
OK