Audio Unit Operation; On/Off Control; Bass/Treble Control; Balance/Fade Control - Ford Fiesta Owner's Handbook Manual

ON/OFF CONTROL

Press the on/off control. This will also
operate the unit for up to one hour with
the ignition turned off.
The radio will switch off automatically after
one hour.

BASS/TREBLE CONTROL

• Press the sound menu button.
• Use the up and down arrow buttons
to select the required setting.
• Use the left and right arrow buttons to
make the necessary adjustment.
The display indicates the level selected.
Press the OK button to confirm the new
settings.

BALANCE/FADE CONTROL

The fade control is used to adjust the
sound distribution from front to rear in
vehicles equipped with rear speakers.
The balance control is used to adjust the
sound distribution between the left and
right speakers.
• Press the sound menu button.
• Use the up and down arrow buttons
to select the required setting.
• Use the left and right arrow buttons to
make the necessary adjustment.
The display indicates the level selected.
Press the OK button to confirm the new
settings.

WAVEBAND BUTTON

Press the RADIO button to select from
the wavebands available.

Audio unit operation

158
The selector can also be used to return
to radio reception when you have been
listening to another source.
Alternatively, press the left arrow button
to display the available wavebands. Scroll
to the required waveband and press OK.

STATION TUNING CONTROL

Seek tuning
Select a waveband and briefly press one
of the seek buttons. The unit will stop at
the first station it finds in the direction you
have chosen.
Manual tuning
Type 1
• Press the MENU button.
• Select RADIO mode and then
MANUAL TUNE.
• Press one of the arrows to tune down
or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
• Press OK to continue listening to a
station.
Type 2
• Press function button 2.
• Then press one of the arrows to tune
down or up the waveband in small
increments or press and hold to
increment quickly, until you find a
station you want to listen to.
• Press OK to continue listening to a
station.
Scan tuning
SCAN allows you to listen to a few
seconds of each station detected.