Frigidaire FFLG2022MW0 Installation Manual page 19

Connecting drain and electrical
1 Form a "U" shape on the end of the drain hose with the
hose pointed toward the drain. Place the formed end in
a laundry tub or a standpipe and secure with a cable tie
provided in the enclosure package.
2 Place the hook end of the drain hose in the drain
opening. Secure the drain hose with the cable tie
(provided in the enclosure package) to the standpipe,
inlet hose, laundry tub, etc. so the hose does not pull
out from the force of the water.
Be sure the power is off at a circuit breaker/fuse box before
plugging the power cord into an outlet.
3 Plug the power cord into a grounded outlet.
i@ ¸
Do not, under
1
any circumstances,
cut, remove,
or bypass the
ground no p no.
3: ,oog
4 Turn on the power at the circuit breaker/fuse box.
5 Read the Use & Care Guide provided with the laundry
center, It contains valuable and helpful information that
will save you time and money.
6 Run the washer through a complete cycle, checking for
water leaks and proper operation.
7 If you have any questions during initial operation,
please review the "Avoid Service Checklist" in your Use
A Care Guide before calling for service.
8 Place these instructions in a location near the appliance
for future reference.
A wiring diagram and technical data sheet are located
behind the dryer access panel.