System > System Setting - D-Link DGS-1224T User Manual

System > System Setting
The System Setting includes IP Information and System information.
By default DHCP is disabled. If DHCP is disabled, the IP Address,
Subnet Mask and Gateway can be manually configured. By entering
a System Name and System Location, the device can more easily be
recognized through the SmartConsole Utility and in other Web-Smart
devices on the LAN. The Login Timeout controls the idle time-out
for security purposes, when there is no action in the Web-based Utility.
When the Login Timeout expires, the Web-based Utility requires a re-
login before using the Utility again. The Group Interval send IGMP
v1 report packet by switch, it is for SmartConsole Utility to discovery
our switch when we in IGMP protocol, zero means disable Group
Interval, and 120~1225 means send IGMP v1 report according the
value which unit is seconds.
Figure 23 – System > System Setting
31