Line Queuing With Automatic Callback - Toshiba Strata DK User Manual

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
To cancel Automatic Callback (busy or DND stations)
Press a [DN] +

Line Queuing with Automatic Callback

Automatic Callback enables a waiting queue for an available line after attempting access to a
line group when all lines are busy. The system calls you back when a line becomes available.
To set Line Queuing
1. Press
... or press .
2. Press
3. Lift the handset immediately
or press the flashing [DN].
To cancel Line Queuing
Press a [DN] +
Features
If you receive a busy tone after answering the
callback, the called party has already received or
originated another call. Your request is not cancelled.
+ .
The busy tone stops momentarily, then you hear two
seconds of dial tone, then busy tone resumes.
. You can make other calls while waiting for a line to
become available.
The [DN] LED from which you attempted to first
access the line flashes at the incoming call rate, and
your telephone rings at a fast rate.
Note
You hear CO dial tone. If you hear a busy tone, the
line has already been seized or has received an
incoming call. Your request is not cancelled.
You are called again the next time a line becomes
available. The Line or [DN] LED lights steady.
+ .
You must answer within three rings to prevent
the callback from being cancelled.
Automatic Callback
51