Download Print this page
Dynex DX-TRP60 Quick Setup Manual

Dynex DX-TRP60 Quick Setup Manual

60" tripod

Advertisement

Quick Links

Important safety instructions

• Make sure that all levers, handles, knobs, and leg locks are
correctly tightened, and that all three legs are fully opened
before use.
• Do not carry or transport the tripod with camera equipment
attached (for example: over your shoulder or cradled in your
arms).
• Do not store or expose your tripod to excessive heat or cold, or
use near any flame or fire.
• Do not OIL or GREASE any part of the tripod.
• Do not use any solvents or thinners to clean your tripod. Use
only a mild detergent and wipe dry with a soft, lint-free cloth.
• Do not exceed the load limit of this tripod.

Specifications

Folded length: 22.5" (57.1 cm)
Maximum height: 60" (152.4 cm)
Minimum height: 21.7" (55.2 cm)
Weight: 2.75 lbs (1.25 kg)
Load capacity: 7.7 lbs (3.49 kg)
One-year limited warranty
For complete warranty go to www.dynexproducts.com.
1-800-305-2204 (U.S. and Canada) or 01-800-926-3020 (Mexico)
BEST BUY IMPORTS S. DE R.L. DE C.V.
AVENIDA SANTA FE NO. 440 PISO 2 OFNA 202 Y 203 P3 Y P4
COLONIA SANTA FE CUAJIMALPA, C.P. 05348, DELEGACIÓN
CUAJIMALPA DE MORELOS, MEXICO, DISTRITO FEDERAL
RFC: BBI0802114Q2
DYNEX is a registered trademark of BBY Solutions, Inc. Registered in some
countries.
©2013 BBY Solutions, Inc. All Rights Reserved.
4
V5 ENGLISH 13-0524
DX-TRP60
60" Tripod
Before using your new product, please read
these instructions to prevent any damage.
QUICK SETUP GUIDE

Advertisement

loading

Summary of Contents for Dynex DX-TRP60

  • Page 1: Important Safety Instructions

    COLONIA SANTA FE CUAJIMALPA, C.P. 05348, DELEGACIÓN CUAJIMALPA DE MORELOS, MEXICO, DISTRITO FEDERAL RFC: BBI0802114Q2 DYNEX is a registered trademark of BBY Solutions, Inc. Registered in some countries. ©2013 BBY Solutions, Inc. All Rights Reserved. Before using your new product, please read these instructions to prevent any damage.
  • Page 2: Package Contents

    Package contents Using your tripod • Tripod (with quick-release plate installed) 1 Open the flip-lever leg locks on • Bag each leg and extend the legs • Quick-Release Plate to the desired length. Open • Quick Setup Guide the leg sections from the top down (thickest section first) to Features reach the desired height.