Setting The Saw Chain - Echo CS-370F Instruction Manual

MAINTENANCE

Setting The Saw Chain

Drive link
Tie strap
Right hand cutter
Important points for proper maintenance of saw chain:
• Keep the cutters sharp at all times.
• Keep the left and the right cutters properly aligned.
• Note that blunt or irregular cutters will result in poor cutting
performance, increased vibration of chains and premature
breakage of the saw chain.
• Drive link serves to remove sawdust from the groove of the
guide bar. Keep the lower edge of the drive link sharp where
indicated.
Setting Saw Chain
• For setting saw chain, round file (4.0 mm dia. 5/32 in.) and flat
file are used.
• Push file as shown.
• To keep correct position and correct angle, use a file holder.
• Hold the file horizontally.
34
Preset tie strap
Left hand cutter
Guard link
CS-370F
Top plate
Side plate
Depth gauge
For more information
scan this QR code.
Sharpen lower edge
30°
Keep this angle
90°
X7503253101
© 08/2013 ECHO Inc.