Electronic Programme Guide
Entering the EPG
You can press the "EPG" key on the remote
control to Enter into the EPG page. As shown
below:
6
3
4
7
Enter the EPG menu, "Weekly" mode, (7 Day
EPG), is the default setting, this menu has 7
parts:
Tab 1
shows the title
Tab 2
shows the time and date
Tab 3
shows selected date
Tab 4
shows programme list, press "UP/
DOWN" to switch between
programmes
Tab 5
shows the time range and
programme information
Tab 6
shows programme information
from Tab 5
Tab 7
shows information for keys
corresponding to the coloured keys
on the remote control
Press "LEFT/RIGHT" to switch between
programmes in the list
Press the "RED" key to enter into DAILY/NOW/
NEXT/WEEKLY" mode which displays the
channels and programme information in different
time ranges, as shown in the picture.
1
2
5
12
Press the "YELLOW" & "BLUE" key to switch
between days in Tab 3
Press "UP/DOWN" key to move upward and
downwards to switch between the different
programmes in Tab 5
Press "LEFT/RIGHT" key to view the programme
information in different time ranges in Tab 6.
When a programme is selected, press the "info"
key to select the information corresponding to
the current program, as shown below.
When a programme is selected in Tab 5, press
the green key to set a recording. Pressing green
key again sets a reminder, a third press cancels
any settings, as shown in the diagram overleaf: