Table of Contents
Advertisement
-
y
•
t~'4.
rq;."' ' ' '
:1""
i"'a
' " '
- , ' ' ' ' ' . 1 "
; k . #
J'
4"
.~Oi·~
~
\
,.,.
~~
~",,"
-.,; ' " ,
"~:;;
~,.",
~"":l!!'<l"wstomizing
the Function Settings
1.
In the main menu of
Settings,
press
~
button to select
Display,
and then press OK to confirm.
HDMIPreferred Formlit . ~ .1080p(l-fDMi)
TV Type
Resolution
If your TV is a high-definition TV(HOTV)
connected to the HOMI jack on your
player and you want your player to set
HOMI Auto
the output resolution based on informa-
tion exchanged between the TV and your
player over the HOMI cable.
If the TV is a high-definition TV (HOTV)
capable of
1
DSDp (any frame rate) con-
1
DSDp (HOMI)
nected to the HOMI jack on your player
If your TV is a high-definition TV (HOTV)
1DSDi
capable of 1DSOi only
If your TV is a high-definition TV (HOTV)
720p
capable of 720p only
If your TV is an enhanced-definition TV
48Dp
(EOTV)
If your TV is a standard-definition NTSC
4S0i
TV (American or Asian SO TV)
~CQnnected
.
,
. ' , -
~.
16:9 Pillart)ox
HDMIStatus
Resolution
TV Aspect
"FtlinMode·
DeeilCOlor
Display
Display Setting
2. Press. / T to select an option, and then press OK.
3. Use. / T to select the desired option, and then press
OK to confirm your selection.
4. Press ... to go to the previous menu.
HOMI Status:
This option displays the HOMI status. If an HOMI TV is
connected,
Connected
appears. If an HOMI TV is not
connected,
Disconnected
appears.
TV Aspect:
16:9
wide,
16:9
Pillarbox,
4:3
Pan and Scan
and 4:3
Letter
Box
are available for your choice.
Film Mode:
Movies are recorded on film at a rate of 24 pictures (frames)
per second. Many of the movies on Blu-ray discs are placed
on the discs at this frame rate. If your TV supports 24 frames
per second, but you would prefer viewing the video at a
higher frame rate, you should turn off Film Mode. Off selects
a 60 frames/second output format.
HOMI Preferred Format:
This option shows the best HOMI format for the connected
TV.
Resolution:
You can define the video output resolution in this option. In
case that the menu of "Resolution" setting disappears, make
composite video (yellow) connection to restore it, then select
the resolution which is compatible with the connected TV.
Deep Color:
This option decides whether to turn off the Deep Color
(color depth) setting for video signals output from the HDMI
OUT jack.
Connecting the player and a TV that supports Deep
Color allows more accurate color reproduction than when
connecting it to a TV that does not support Deep Color. It is
recommended to set this option Off if the picture is unstable
or colors appear unnatural.
Notes:
•
Selecting a resolution the TV does not support could
result in an unstable picture or loss of the picture. See
the documentation that came with the TV to find the
resolutions the TV supports.
•
Only the HOMI output on your player supports 1080p
video output at any frame rate. If the TV is connected
to the component output, the video output is limited to
1080i or lower.
Advertisement
Table of Contents
