How to operate the tuner
Presetting stations manually
Touch the
Turn the [TUNE TRACK] panel button to select the frequency to
1
be preset.
Touch (2 seconds or more) a preset
2
switch.
The selected frequency will be set for
that preset switch, and the frequency will
be displayed on the screen.
ATTENTION
Checking preset stations
This recalls all the stations that have been preset either automatically or
manually and plays them each for 5 seconds.
Touch the
1
(less than 1 second).
"P.SCAN" will be displayed, and the
preset stations will each be played back
for 5 seconds.
Touch
2
more.
The station that was being played when the switch was touched will
then be played continuously.
or
touch switch and select an FM or AM broadcast.
FM
AM
If the power supply from the vehicle's battery is disconnected from the unit
as a result of vehicle maintenance or because the unit has been removed
from the vehicle, the stations recorded in the preset switches will be
cleared. If this happens, you will need to reset the stations.
touch switch briefly
ASM
ASM
touch switch briefly (less than 1 second) once
70