Ip & Mac Binding Setting; Binding Settings - TP-Link TL-WR842ND User Manual

To add/modify a Bandwidth Control rule, follow the steps below.
1. Click Add New... shown in Figure 4-86, you will see a new screen shown in Figure 4-87.
2. Enter the information like the screen shown below.
3. Click the Save button.
4.16 IP & MAC Binding Setting
Figure 4-88 the IP & MAC Binding menu
There are two submenus under the IP &MAC Binding menu (shown in Figure 4-88): Binding
Settings and ARP List. Click either of them, and you will be able to scan or configure the
corresponding function. The detailed explanations for each submenu are provided below.

4.16.1 Binding Settings

This page displays the IP & MAC Binding Setting table; you can operate it in accord with your
desire (shown in Figure 4-89).
TL-WR842ND 300Mbps Multi-Function Wireless N Router User Guide
Figure 4-87 Bandwidth Control Rule Settings
Figure 4-89 Binding Setting
- 92 -