Belkin AC1000 DB User Manual page 8

GeTTInG sTaRTed
3. A progress screen will appear while additional software is
installed. This may take a few minutes to complete. Once
finished, a "Success" message will appear indicating that you
are connected to the Internet via your new Belkin Router.
during setup you may be asked for additional information.
You may need to enter a username and password provided by your ISP.
This username and password is likely to be found on materials that
came from your ISP when you signed up for service. If necessary, you
may need to contact your ISP to retrieve your username and password.
If you have a static IP address, you may need to enter
additional information also provided by your ISP.
If your computer doesn't have a wireless adapter, or the setup
software is unable to control it, you may be asked to connect
your computer to the Router with a network cable.
6