Sony D-NE509 Service Manual

Portable cd player

Advertisement

SERVICE MANUAL
Ver 1.0 2003. 07
US and foreign patents licensed from Dolby Laboratories.
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength: λ = 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
D-A conversion
1-bit quartz time-axis control
Frequency response
+1
20 – 20,000 Hz
dB
–2
(measured by JEITA CP-307)
Output (at 4.5 V input level)
Headphones (stereo minijack)
Approx. 5 mW + Approx. 5 mW at 16 Ω
(Approx. 1.5 mW + Approx. 1.5 mW
at 16 Ω)*
*For the customers in Europe
Sony Corporation
9-961-107-01
2003G04-1
Personal Audio Company
© 2003. 07
Published by Sony Engineering Corporation

SPECIFICATIONS

Power requirements
For the area code of the model you
purchased, check the upper left side of the
bar code on the package.
• Two LR6 (size AA) batteries: 1.5 V DC × 2
• AC power adaptor (DC IN 4.5 V jack):
US/CND/E92/MX model: 120 V, 60 Hz
E18 model: 100 – 240 V, 50/60 Hz
1
Battery life*
(approx. hours)
(When you use the CD player on a flat and stable
surface)
Playing time varies depending on how the CD
player is used.
When using two Sony alkaline batteries
LR6 (SG) (produced in Japan)
G-PROTECTION function
"1"
"2"
Audio CD
48
45
2
ATRAC3plus files*
77
77
3
MP3 files*
72
72
*1 Measured value by the standard of JEITA
(Japan Electronics and Information Technology
Industries Association)
*2 When recorded at 48 kbps or 64 kbps
*3 When recorded at 128 kbps
D-NE509
Canadian Model
Model Name Using Similar Mechanism
CD Mechanism Type
Optical Pick-up Name
Operating temperature
5°C – 35°C (41°F – 95°F)
Dimensions (w/h/d) (excluding
projecting parts and controls)
Approx. 136 × 26 × 150 mm
(5
× 1
3 ⁄8
1 ⁄16
Mass (excluding accessories)
Approx. 220 g (7.8 oz.)
Supplied accessories
AC power adaptor (1) (EXCEPT US, CND)
Headphones/earphones (1)
CD-ROM (SonicStage Simple Burner) (1)
User's guide for SonicStage Simple Burner (1)
Design and specifications are subject to change
without notice.
• Abbreviation
CND : Canadian model
E18 : AC 100 – 240V area in E model
E92 : AC 120V area in E model
MX : Mexican model
PORTABLE CD PLAYER
US Model
E Model
D-NE510
CDM-3325ER2
DAX-25E
× 6 in.)
1

Advertisement

Table of Contents
loading

Summary of Contents for Sony D-NE509

  • Page 1: Specifications

    CD-ROM (SonicStage Simple Burner) (1) Frequency response player is used. User’s guide for SonicStage Simple Burner (1) 20 – 20,000 Hz When using two Sony alkaline batteries –2 (measured by JEITA CP-307) Design and specifications are subject to change LR6 (SG) (produced in Japan) Output (at 4.5 V input level)
  • Page 2: Table Of Contents

    REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL IN SUPPLEMENTS PUBLISHED BY SONY. OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
  • Page 3: Service Note

    D-NE509 SECTION 1 SERVICE NOTE NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK detection lever OR BASE UNIT The laser diode in the optical pick-up block may suffer electro- static breakdown because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body.
  • Page 4: General

    D-NE509 SECTION 2 GENERAL This section is extracted from instruction manual. Getting started Locating the controls For details, see pages in parentheses. CD player (front) 7 Strap holes 1 OPEN button (page 11) 8 DC IN 4.5 V (external power...
  • Page 5: Disassembly

    D-NE509 SECTION 3 DISASSEMBLY • The equipment can be removed using the following procedure. 3-1. UPPER LID ASSY (Page 5) 3-2. CABINET (UPPER) SUB ASSY (Page 6) 3-3. MD ASSY, MAIN BOARD (Page 6) 3-4. SLED MOTOR ASSY (M501), OPTICAL PICK-UP,...
  • Page 6: Cabinet (Upper) Sub Assy

    D-NE509 3-2. CABINET (UPPER) SUB ASSY 2 five screws (B2) 3 five screws (B2) 7 cabinet (upper) sub assy 5 two claws 4 two claws 3-3. MD ASSY, MAIN BOARD 5 MD ASSY 1 CN601 2 CN401 7 MAIN board...
  • Page 7: Turntable Motor Assy (M502)

    D-NE509 3-4. SLED MO TOR ASSY (M501), OPTICAL PICK-UP, TURNTABLE MOTOR ASSY (M502) 1 three screws (B1.7x4) 7 standard shaft 2 gear cover 8 three screws (B1.7x4) 4 sled motor assy (M501) 9 turntable motor assy (M502) 6 optical pick-up...
  • Page 8: Diagrams

    D-NE509 SECTION 5 DIAGRAMS 5-1. IC PIN DESCRIPTIONS • IC601 CXD3048R (RF AMP, DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO PROCESSOR, D-RAM CONTROLLER) Pin No. Pin Name Pin Description XRAS Low address strobe signal output to the D-RAM Data input enable signal output to the D-RAM...
  • Page 9 D-NE509 Pin No. Pin Name Pin Description TES1 Input terminal for the test (fixed at “L”) TEST Input terminal for the test (fixed at “L”) VSS1 — Ground LRMU Muting on/off control signal output to TA2120FN DOUT Not used (open)
  • Page 10 D-NE509 Pin No. Pin Name Pin Description PCMD_I Serial data input from CXR710 BCK_O Bit clock signal output to CXR710 BCK_I Bit clock signal input from CXR710 DVDD — Power supply 113 to 117 A3 to A0, A10 Address signal output to the D-RAM...
  • Page 11 D-NE509 • IC701 CXR710160-203R (SOUND PROCESSOR) Pin No. Pin Name Pin Description LRCH D/A I/F L/R clock input from CXD3048 D/A I/F bit clock input from CXD3048 VDIOCD0 — Power supply (+2.0 V) PCMD D/A I/F serial data input from CXD3048 DVDD4 —...
  • Page 12 D-NE509 Pin No. Pin Name Pin Description TEST3 Not used (fixed at “L”) TEST2 Not used (fixed at “L”) TEST1 Not used (fixed at “L”) DVDD3 — Power supply DVSS1 — Ground TEST0 Not used (pull down) Not used (open)
  • Page 13 D-NE509 • IC801 TMP91CW28FG (SYSTEM CONTROL) Pin No. Pin Name Pin Description — Ground — Ground VCPU — Power supply (+2.0 V) XRST_O System reset signal output PWM_O Not used (open) BEEP_O Beep signal output AMUTE_O Mute signal output to CXD3048...
  • Page 14 D-NE509 Pin No. Pin Name Pin Description AT3_MP3_V_O IC701 reset P/S_O Not used (open) — Ground XNMI_I Not used (fixed at “H”) VCPU — Power supply (+2.0 V) HP_LIN_SEL_I HP/LINE select input (fixed at “H”) WAKEUP_K_O Interrupt signal output to CXR710...
  • Page 15: Block Diagram -Cd Section

    D-NE590 5-2. BLOCK DIAGRAM — CD SECTION — RF AMP, DIGITAL SIGNAL PROCESSOR, CD MECHANISM DIGITAL SERVO PROCESSOR, BLOCK D-RAM CONTROLLER (CDM-3325ER2) IC601 DETECTOR WDCK WFCK RFDC RFAC XTAO XTAI FOCUS/TRACKING COIL DRIVER, VCC1 SPINDLE/SLED MOTOR DRIVER (+2.2V) D0-D3 IC403 (1/2) RFAC M901 SIGNAL...
  • Page 16: Block Diagram -Audio Section

    D-NE509 5-3. BLOCK DIAGRAM — AUDIO SECTION — 16 BIT D-RAM IC603 XRAS XCAS (Page 15) HEADPHONE AMP IC301 J301 LOUT VREF 7 ROUT MUTE MT SW PWRSW PW SW CN807 BEEP BEEP TXP21 RXD22 TEK23 TEST RST30 CONNECTOR S810...
  • Page 17: Block Diagram -Power Supply Section

    D-NE590 5-4. BLOCK DIAGRAM — POWER SUPPLY SECTION — POWER CONTROLLER IC403 (2/2) B+ +3V SWITCHING FOCUS/TRACKING COIL DRIVER VCC3 POWER SPINDLE/SLED MOTOR DRIVER (+2.6V) CIRCUIT 3 (IC403) +3V, HEADPHONE AMP (IC301) +3V SWITCHING VLGO2 POWER CIRCUIT 2 DRY BATTERY SIZE "AA"...
  • Page 18: Printed Wiring Board -Main Section

    D-NE509 5-5. PRINTED WIRING BOARD — MAIN SECTION — Common Note on Schematic Diagram: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums. • All resistors are in Ω and...
  • Page 19 D-NE590 • Refer to page 18 for Common note on Printed Wiring Board. MAIN BOARD (SIDE B) • Semiconductor Location (Side B) Ref. No. Location D402 D403 D405 D421 D422 L603 TP955 D425 TP954 D801 C707 R718 R713 IC301 X701 TP642 TP702 IC403...
  • Page 20: Schematic Diagram -Main Section (1/2)

    D-NE509 5-6. SCHEMATIC DIAGRAM — MAIN SECTION (1/2) — • Refer to page 22 for IC Block Diagram. • Refer to page 18 for Common Note on Schematic Diagram. IC B/D IC301 FB201 TJ201 J301 TP939 TP935 FB101 TJ101 TP938...
  • Page 21: Schematic Diagram -Main Section (2/2)

    D-NE590 5-7. SCHEMATIC DIAGRAM — MAIN SECTION (2/2) — • Refer to page 22 for IC Block Diagram. • Refer to page 18 for Common Note on Schematic Diagram. (Page 20) C897 C808 R934 R933 TAP805 S820 TP826 S810 C403 L406 L409 L411...
  • Page 22: Ic Block Diagrams

    D-NE509 5-8. IC BLOCK DIAGRAMS IC301 TA2120FN IC403 TB2138AFG 60 59 58 57 56 BEEP BIAS VREF H BRIDGE H BRIDGE H BRIDGE ROUT LOUT 40 LATCH DCIN DC IN 39 DATA LEVEL CONRROLLER SHIFTER 38 CLOCK BAND GAP 37 WAKEUP...
  • Page 23: Exploded Views

    D-NE509 SECTION 6 EXPLODED VIEWS NOTE: • The mechanical parts with no reference The components identified by • Color Indication of Appearance Parts mark 0 or dotted line with mark number in the exploded views are not supplied. Example : 0 are critical for safety.
  • Page 24: Cd Mechanism Section (Cdm-3325Er2)

    D-NE509 6-2. CD MECHANISM SECTION (CDM-3325ER2) M501 M502 The components identified by Les composants identifiés par une mark 0 or dotted line with mark marque 0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piéce...
  • Page 25: Electrical Parts List

    D-NE509 SECTION 7 MAIN ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • SEMICONDUCTORS The components identified by mark 0 or dotted line with mark the parts list may be different from the In each case, u : µ, for example: 0 are critical for safety.
  • Page 26 D-NE509 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C703 1-164-156-11 CERAMIC CHIP 0.1uF < FERRITE BEAD > C704 1-162-907-11 CERAMIC CHIP 0.25PF 50V C705 1-119-750-11 TANTAL. CHIP 22uF 6.3V FB101 1-500-234-22 BEAD, FERRITE (CHIP)
  • Page 27 D-NE509 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark L603 1-400-386-21 INDUCTOR 10uH R625 1-216-853-11 METAL CHIP 470K 1/10W L703 1-469-527-91 INDUCTOR 47uH R626 1-216-864-11 METAL CHIP 1/10W L704 1-469-527-91 INDUCTOR 47uH R628 1-216-837-11 METAL CHIP...
  • Page 28 D-NE509 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R824 1-216-864-11 METAL CHIP 1/10W < VARISTOR > R826 1-216-857-11 METAL CHIP 1/10W R828 1-216-861-11 METAL CHIP 2.2M 1/10W VDR306 1-801-923-11 VARISTOR, CHIP R830 1-216-853-11 METAL CHIP...
  • Page 29 D-NE509 MEMO...
  • Page 30 D-NE509 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2003. 07...

Table of Contents