HP ProLiant DL180 Quickspecs page 7

QuickSpecs
Standard Features
Power Supply Power Supply Power Supply Power Supply
System Fans System Fans System Fans System Fans
OS Support OS Support OS Support OS Support
Rack Airflow Rack Airflow Rack Airflow Rack Airflow
Requirements Requirements Requirements Requirements
Rack Kit Rack Kit Rack Kit Rack Kit
750Watts - (Hot Plug, Autoswitching) Ships Standard
1200Watts - High Efficiency 12V Hot Plug AC Power Supply (Autoswitching) (Optional)
750Watts - Power Supply (Redundant Hot Plug, Autoswitching) (Optional)
1200Watts - High Efficiency Power Supply (Redundant Hot Plug, Autoswitching), CSCI 2007/2008
(Optional)
NOTE: Climate Savers Computing Initiative, 2007-2008 Compliant NOTE: NOTE: NOTE:
NOTE: For additional information please see the Options section of this QuickSpecs. NOTE: NOTE: NOTE:
4 system fans ship standard; Non-hot plug, Non-redundant
Microsoft Windows 2003 R2
Microsoft Windows Server 2008
Microsoft Windows Small Business Server 2008
Microsoft Windows Essential Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Sun Solaris for x64/x86-based Systems
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization NOTE: NOTE: NOTE:
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/supportos
http://www.hp.com/support/DL180G5
Rack 10000 G2 series Cabinets Rack 10000 G2 series Cabinets Rack 10000 G2 series Cabinets Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure CAUTION: CAUTION: CAUTION:
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830
square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a
minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This CAUTION: CAUTION: CAUTION:
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
HP ProLiant DL180 rack models have fixed rails which provide support for round or square mounting
holes, including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 26" -
36".
DA - 12903 North America — Version 22 — April 30, 2010
HP ProLiant DL180 Generation 5 (G5) HP ProLiant DL180 Generation 5 (G5) HP ProLiant DL180 Generation 5 (G5) HP ProLiant DL180 Generation 5 (G5)
and our driver download page
Page 7