Fitting The Trimmer Guard And Trimmer Head - Husqvarna 128CD Operator's Manual

itting the trimmer guard and
F
trimmer head (Model 128CD)
S Fit the correct trimmer guard (A) for use
with the trimmer head. Hook the trimmer
guard/combination guard onto the fitting on
the shaft and secure with the wing nut (B).
B
A
C
S Fit the dust cup (C) on the shaft. The nut
must be completely covered by the dust
cup.
S Hold the dust cup with a wrench to pre-
vent the shaft from rotating.
S Screw the trimmer head (D) onto the
shaft.
D
S To dismantle, follow the instructions in
the reverse order.
115374327 Rev. 6 5/31/12
ASSEMBLY
English--- 14