Cli: Enabling Vlan Support - HP 530 Management Manual

CLI: Enabling VLAN Support

CLI Commands Used in This Section
Command Syntax
vlan
[no] untagged-vlan <vid>
management-vlan <vid>
show wlans
The following example shows how to establish a management VLAN ID.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# interface ethernet
ProCurve Access Point 530(ethernet)# management-vlan 9
ProCurve Access Point 530(ethernet)#
The following example shows how to set an untagged VLAN ID in the interface
context.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# interface ethernet
ProCurve Access Point 530(ethernet)# untagged-vlan 9
ProCurve Access Point 530(ethernet)#
The following example shows how to set a tagged VLAN at the WLAN context.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)# vlan 3
ProCurve Access Point 530(radio1-wlan1)#
General System Configuration
Configuring VLAN Support
CLI Reference Page
9-147
9-148
9-148
9-118
5-61