Related Manuals for Hawking H-UC232S
Summary of Contents for Hawking H-UC232S
-
Page 2: Fcc Warning
VCCI Mark Warning LIMITED WARRANTY Hawking Technology guarantees that every H-UC232S is free from physical defects in material and workmanship under normal use for two (2) years from the date of purchase. If the product proves defective during this two-year warranty period, call Hawking Customer Service in order to obtain a Return Authorization number. - Page 3 Index TABLE OF CONTENTS Introduction ……………………………….………………………………………...…… 3 Safety Instructions ………………………………………………………………...……. 3 Features ……………………………………….………………………………………….. 3 System Requirements ………………………….………………………………………… 3 Package Contents ……..………………………..………………………………………… 3 Hardware Installation ………..………………..…………………………………………. 4 Software Installation ……………………………..………………………………………. 4...
- Page 4 Introduction The Hawking H-UC232S USB Serial Converter operates as a bridge between the USB and standard RS232 Serial port. The cable can easily be connected to a PC or USB Hub. Moreover, this product can connect RS-232 devices or any serial devices with DB 9P connectors, including PDA, scanner, printer and modem.
- Page 5 Hardware Installation Software Installation Windows XP 1. Select “Install from a list or specific location [Advanced],” and click “Next”...
- Page 6 2. Select “Search removable media (floppy, CD-ROM…), and click “Next” 3. Click “Continue Anyway” The Windows driver file searches for the device. Press “OK.”...
- Page 7 5. Click “Browse” and select “CD-ROM drive” as your target drives and click ”OK.” 6. Windows has finished installing the software; click “Finish” to complete installing driver.
- Page 8 6. In “System Properties,” “Device Manager,” “Prolific USB-to Serial Converter Port (COM3)” will appear. NOTE: The Serial Converter doesn’t support interrupt transfer mode devices: EX: KEYBOARD, MOUSE , JOYSTICK ETC. CALL HID DEVICE Windows 98SE 1. Windows will search for a new device, then press ”Next”.
- Page 9 2. Select “Search for the best driver for your device [Recommended],” and press ”Next”. 3. Click “Browse” and select “CD-ROM drive” as your target drives and click ”Next”...
- Page 10 4. The Windows driver file will search for the device. Press “Next”. 5. Windows has finished installing the software; click “Finish” to complete installing driver.
- Page 11 6. In “System Properties,” the Device Manager will display “USB to Serial Port (COM3)” and “Prolific USB-to Serial Comm Port.” Once this is displayed, installation is complete. Windows 2000 Click “Next” to start the installation.
- Page 12 Select “Search for the best driver for your device” and click “Next.” Select “CD-ROM drives” and click “Next” to continue. Click “Next” to install the driver for the device.
- Page 13 Click “Finish” to complete the installation. The statement “USB-to-Serial Port (COM3)” should appear in your “Device Manager.”...
- Page 14 Windows ME Select “Automatic search for a better driver” and click “Next”. Click “Finish” to complete installation.
- Page 15 These statements: “USB to Serial Port (COM3)” and “Prolific USB-to Serial Bridge” should appear in your “Device Manager.” NOTE: The USB Serial Converter cannot support interrupt transfer mode devices, such as, keyboards, mice, joysticks, etc. Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damages, including but not limited to special, incidental, consequential, or other damages.