Westinghouse POP663 Owner's Manual page 19

MODEL POP 783 PROGRAMMABLE CONTROLLER
Using FHU (Fast Heat Up) mode
To quickly and efficiently preheat your oven, it is recommended to select the "Fast Heat" cooking
feature.
1. Ensure the appliance is on by pressing the "On / Off". The oven lights will light.
2. Select the desired oven function by pressing "Function".
3. Set the cooking temperature by pressing the – or + to decrease or increase the temperature.
NOTE: The temperature can only be adjusted when the degrees symbol "°" is flashing.
The temperature setting changes in increments of 5 °C.
4. Press the "Fast Heat". The letters "FHU" will appear on the temperature display.
5. When the set temperature is reached the buzzer will sound and the set temperature will be
displayed.
NOTE: "FHU" cannot be selected if the oven centre temperature is above the preset
temperature.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be switched on.
1. Switch off the appliance using the "On / Off".
2. Press "Function" and – at the same time, hold until the word "SAFE" is displayed.
The child-proof lock is now engaged.
NOTE: When the child-proof lock function is active the time of day and minute minder can
only be set.
Releasing the child-proof lock
1. Press "Function" and – at the same time, hold until the word "SAFE" is cleared from the
display. The child-proof lock is now released and the oven is ready to use.
Beep on touch
The beep sound can be activated anytime when a symbol is pressed.
1. Ensure the oven is off by pressing "On / Off".
2. Press "Function" and + simultaneously for 2 seconds, a single beep will sound to confirm the
operation. Repeat the above procedure to reset the beep on touch mode. As default, the beep
on touch mode is off.
Demo mode
This mode is intended to be used in retail shops to demonstrate the oven functionality without
any power consumption except the oven lamps.
1. To activate this feature the appliance should be in stand-by mode. (No function selected).
2. Press and hold "Fast Heat" and + for 2 seconds, the appliance will beep once. When the
appliance is initially turned on the letter "d" will appear in the left hand corner of the display
to confirm that the appliance is in demo mode. All functions can be selected, but the
thermometer icon will not flash. Repeat the above procedure to deactivate the demo mode.
Safety cut-out feature
The oven automatically switches itself off if the temperature is not adjusted or the appliance is
left operating after a period of time. The oven switches itself off after:
• 20 hours when set between 30°C and 120°C
• 8.5 hours when set between 120°C and 200°C
• 5.5 hours when set between 200°C and 250°C
• Select the correct shelf location for food being cooked.
• Make sure dishes will fit into the oven before you switch it on.
(continued)
19