GE MDS entraNET 900 Technical Manual page 78

68
Approved Remotes List Menu
Figure 3-31. Approved Remotes List Menu
The AP restricts communication to only those Remotes included in the
Approved Remotes List. Messages received from Remotes that are not
in this list are discarded.
•
Add Approved Remote
entry must consist of seven or more characters.
[
Serial number of Remote–at least seven characters
•
Delete Approved Remote
NOTE: For security, delete a decommissioned or stolen radio
immediately.
•
Previous Page
Approved Remotes Menu.
•
Add Associated Remotes
(1-1024) to the approved Remote list. Alternatively, you can
enter each Remote serial number manually.
• —Completely purges all Remotes from the current list.
Delete All
• —Moves you to the next page within the Approved
Next Page
Remotes List Menu.
•
Number of Remotes
currently connected to the AP.
•
Approved Remotes List
Remotes that are authorized to communicate with this AP. If a
Remote is not on this list, it cannot associate with this AP.
MDS entraNET Technical Manual
—Enter the Remote serial number. This
—Enter the Remote serial number.
—Returns you to the last page viewed within the
—Adds all currently associated Remotes
—Shows the number of Remotes that are
—Simple listing of the serial numbers of
]
05-4055A01, Rev. E