Maintenance Chart 1 - Yamaha 40X Owner's Manual

EMU34446

Maintenance chart 1

TIP:
Refer to the sections in this chapter for explanations of each owner-specific action.
●
The maintenance cycle on these charts assume usage of 100 hours per year and regular
●
flushing of the cooling water passages. Maintenance frequency should be adjusted when
operating the engine under adverse conditions such as extended trolling.
Disassembly or repairs may be necessary depending on the outcome of maintenance
●
checks.
Expendable or consumable parts and lubricants will lose their effectiveness over time and
●
through normal usage regardless of the warranty period.
When operating in salt water, muddy, other turbid (cloudy), acidic water, the engine should
●
be flushed with clean water after each use.
The " " symbol indicates the check-ups which you may carry out yourself.
The " " symbol indicates work to be carried out by your Yamaha dealer.
Item
Anode(s) (external)
Anode(s) (cylinder
head, thermostat
cover)
Anodes (exhaust cover,
cooling water passage
cover, Rectifier Regula-
tor cover)
Battery (electrolyte
level, terminal)
Battery (electrolyte
level, terminal)
Cooling water leakage
Cowling lock lever
Engine starting condi-
tion/noise
Engine idle
speed/noise
Fuel filter (can be dis-
assembled)
Fuel line (High pres-
sure)
Actions
Inspection or replace-
ment as necessary
Inspection or replace-
ment as necessary
Replacement
Inspection
Fill, charging or replac-
ing as necessary
Inspection or replace-
ment as necessary
Inspection
Inspection
Inspection
Inspection or replace-
ment as necessary
Inspection
Initial
20 hours 100
(3 hours (1
months) year)
Maintenance
Every
300 500
hours (3 hours (5
years) years)
57