Table of Contents
Advertisement
If
Try one or more of the following
■
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■
Shutter button
does not work.
■
■
Slide show does
not run on external
■
video device.
■
Picture is too light.
■
■
Picture is not clear.
■
■
■
■
■
Picture is too dark.
■
■
■
www.kodak.com/go/support
Transfer the picture to the computer
internal memory
(see page
CAUTION: Formatting a card deletes all pictures and videos,
including protected files.
Turn on the camera
(page
Transfer pictures to the computer
camera
(page
19), switch image storage locations
a card with available memory
Adjust the camera Video Out setting (NTSC or PAL,
See the external device's user's guide.
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
Decrease Exposure Compensation
Clean the lens
(page
58).
Make sure your camera is not in Close-up mode.
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
Press the shutter button halfway to focus and set exposure. When the
framing marks turn green, press the Shutter button completely down.
Place the camera on a flat, steady surface or use a tripod.
Turn on the flash
(page
Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
Use Fill flash
(page
9) or change your position so light is not behind
the subject.
Increase Exposure Compensation
(page
39), then format the card or
37).
2).
(page
39), delete pictures from the
(page
3).
(page
16).
9).
(page
16).
Troubleshooting
(page
35), or insert
see page
37).
47
Hide quick links:
Advertisement
Table of Contents
