Power Fuse; Mounting; Car Stereo - Boss Audio Systems AVA-250 Owner's Manual

Ill POWER FUSE III
Power fuses protects both this amplifier and the automobile electrical system from wrong
conditions. The fuse is a standard automotive type. The capacity is each Model current
requirement is different. Replace only with same current rating fuse otherwise damage or fire can
result.
Ill MOUNTING III
Mark the locations for the mounting screw holes by holding the AMPLIFIER in place and using a
scribe or one of the mounting screws inserted in each mounting hole in turn to mark the mounting
surface. If the mounting surface is carpeted, measure the hole centers and mark with a felt-tip
pen.
Drill pilot holes for the mounting screws into the holes of the system insert the mounting screws
into the holes and tighten them securely
LOW INPUT WIRING MODEL:
250/450/550/700/750
MODEL:AVA-650/800
MODEL: AVA-250/450/550/700/750

CAR STEREO

AVA-
! ± WIRING
LH GJ INPUT
CAR STEREO
-7-
MODEL:AVA-650/800