Settings - Haier LE47H5000 User Manual

Settings

A
Press button to enter Cloud interface.
B
634button to select Settings. Press OK
Press
to enter.
C
Press 6button to select the item which require to
be adjusted.
Connecting to a Wired Network
A
Press 6button to select Ethernet, press OK to
enter.
B
6 button to select DHCP item, then
Press
press Save button, it will automatically finished.
You can set up your TV to access the Internet through
your local area network (LAN) using a wired or
wireless connection.
Connecting to a Wired Network. You can attach your
TV to your LAN using a cable (cable not included) in
three ways:
• You can attach your TV to your LAN by connecting
the LAN port on the back of your TV to an external
modem using a Cat 5 cable. See the diagram below:
LAN
• You can attach your TV to your LAN by connecting
the LAN port on the back of your TV to a router.
which is connected to an external modem. Use a Cat
5 cable for the connection. See the diagram below:
Basic Receiving and Playing Operations
LAN
• Depending on how your network is configured,
you may be able to attach your TV to your LAN by
connecting the LAN port on the back of your TV
directly to a network wall outlet using a Cat 5 cable.
See the diagram below. Note that the wall outlet is
attached to a modem or router elsewhere in your
house.
Note
The terminals (the position of the port and the
„
type) of the external device may be different
depending on the manufacturer.
If the IP address allocation by the DHCP server
„
has failed, turn the external modem off, turn it
on again after at least 10 seconds and then try
again.
„ For the connections between the external
modem and the router, refer to the owner's
manual of the corresponding product.
You can connect the TV to the LAN directly
„
without connecting it through a router.
You cannot use a manual-connection-type ADSL
„
modem because it does not support DHCP. You
have to use an automatic connection-type ADSL
modem.
Connecting to a Wireless Network
A
6button to select WI-Fi, press OK to
Press
enter, To see available networks, turn Wi-Fi On.
B
Press 6 button to select Wireless Setting
item,press OK button to enter.
C
Press 6 button to select the network you need
LED Backlit Flat TV Instruction Manual EN-20
En
LAN