Disarming A System In Alarm - Magellan MG6250 Console User Manual

To disarm an armed system:
1.
2.

Disarming a System in Alarm

To disarm a system in alarm:
1.
2.
WARNING:
location (e.g., a neighbor's house).
22 | Chapter 3 - Arming and Disarming
Enter designated entry point.
Enter your user code (default: 1234). Once a valid user code has been entered, the
indicating that the system has been disarmed.
Press the key.
Enter your user code (default: 1234). Once a valid user code has been entered, the
indicating that the system has been disarmed. After the system has been in alarm the
displayed on the console's LCD screen. For more information on viewing alarm messages, refer to section
Alarm Memory Display on page 23.
In case of a burglar alarm, leave the premises immediately and call the police from a safe
LED will turn orange
LED will turn orange
symbol will be
MG6250 Console • User Guide