Cd And Radio; Loading A Cd; Programming A Cd; Tuning The Radio - GPX KC222S User Manual

CD and Radio

Loading a CD

Press the Power button to turn the
1.
under cabinet music system on.
2. Press the source button to
switch to CD Mode.
3. Press the Open/Close button
to open the CD drawer.
4. Load a CD into the CD drawer,
label side facing up.
5. Once the CD is loaded, the CD
should start playing automatically.
6. If the CD does not start
playing automatically, press
the Play/Pause button.

Programming a CD

1. Follow the instructions
for Loading A CD.
Press the Stop button.
2.
3. Press the Prog button.
"01", indicating the current program
track, will begin flashing on the display.
Press the Skip/Tune buttons to
4.
select the CD track you would
like to play in the program.
Press the Prog button.
5.
6. Repeat steps 3, 4, and 5 to continue
programming CD tracks.
Up to 20 tracks can be programmed.
Press the Play/Pause button to
7.
begin playing the programmed CD.
8. To cancel a program, press
the Stop button twice.
10

Tuning the Radio

Press the Power button to turn the
1.
under cabinet music system on.
2. Press the Source button to switch
to AM or FM Radio Mode.
Radio Mode is indicated by "AM" or "FM"
on the display.
Press the Skip/Tune button to
3.
tune the AM or FM radio.
Hold down the Skip/Tune button to
4.
scan for the next available station.

Saving a Station as a Preset

1. Follow the instructions for
Tuning the Radio.
2. Tune to the desired station.
Press the Prog button.
3.
4. Preset number will appear
on the display.
Press the Skip/Tune buttons to adjust
5.
to the desired preset number.
Press the Prog button to
6.
save the current radio station
to the selected preset.

Tuning Preset Radio Stations

1. Follow the instructions for Tuning the
Radio and Saving a Station as a Preset.
Press the Memory button to cycle
2.
through preset radio stations