Connecting Gz100 To Your Pc; System Requirements; Gsm/Gprs Modem - Sharp GZ100 User Manual

Connecting GZ100 to Your PC

You can use the following functions by connecting the
GZ100 to your PC using an infrared port, USB port* or
Bluetooth wireless technology port:

• GSM/GPRS modem

• Handset Manager for GZ100
• Bluetooth wireless connection
* Requires an optional USB data cable XN-1DC30 for
USB port connection.

System Requirements

Operating System: Windows
®
Windows 2000**, Windows
®
* Windows 98 Second Edition, Windows
Service Pack 1 with Internet Explorer 5.01 or later
** Service Pack 4
***Service Pack 1a
Supported Software:
®
Microsoft Outlook/Outlook Express
Interface: Infrared port, USB port or Bluetooth wireless
Port
CD-ROM drive
110 Connecting GZ100 to Your PC
® ®
98*, Windows Me,
®
XP***
®
98
GSM/GPRS Modem
You can use GZ100 as a GSM/GPRS modem to access
the Internet from your PC. Connect your phone to your
PC via Bluetooth wireless technology, Infrared or USB
interface. Software installation on your PC is required.
For details, see "Software Installation" on page 111.
Modem via the Infrared Connection
To use the modem function via the Infrared connection,
see "Using the Infrared Function" on page 105 and turn
the modem function on.
Modem via the USB Cable
To use the modem function using a USB cable, use the
cable mentioned above and see the instructions
accompanying the cable.
Modem via Bluetooth connection
To use the modem function via Bluetooth wireless
technology interface, see "Using the Bluetooth
Wireless Function" on page 102 and turn the modem
function on.
For details on software support, refer to the following
site:
http://www.sharp-mobile.com
Note
• Modem communication is not possible whilst
communicating with the Handset Manager via
Bluetooth wireless technology, infrared or USB
interface.