Inserting An Sd Card - JVC GY-HM70U Basic User's Manual

Inserting an SD Card

Insert a commercially available SD card before recording.
This unit comes with two SD card slots. When two SD cards are inserted and "SEAMLESS
RECORDING" in the "RECORD SETTING" menu is set to "ON", recordings can be
continued on the other card even if one card is full or error occurs on one card.
Set the "STANDBY/ON
OFF" switch to "OFF".
Turn off the power of this unit before
inserting or removing a SD card.
.
To remove the card
o
Push the card inward once, then pull it out straight.
Memo
Operations are confirmed on the following SD cards.
Manufacturer
Video A
Still Image B
Using SD cards (including SDHC/SDXC cards) other than those specified
0
above may result in recording failure or data loss.
This unit is not guaranteed to operate with all SD cards, even when using the ones
0
specified above. Some SD cards may not work due to specification changes, etc.
To protect the data, do not touch the terminals of the SD card.
0
When using an SDXC card, check its compatibility with the OS of your computer
0
by referring to the Detailed User Guide.
10
Panasonic, TOSHIBA, SanDisk
Class 4 or higher compatible SD card (2 GB)/
Class 4 or higher compatible SDHC card (4 GB to 32 GB)/
Class 4 or higher compatible SDXC card (48 GB to 128 GB)
When recording with video quality "UXP", Class 6 or
0
higher is recommended.
When recording in progressive format (60p), Class 6 or
0
higher is required.
SD card (256 MB to 2 GB) / SDHC card (4 GB to 32 GB) /
SDXC card (48 GB to 128 GB)
Open the door.
Slide the "DOOR LOCK" lever to
the left, and pull the door
towards you.
Insert an SD card into slot A.
Label
Close the door.
After closing the door, slide the
"DOOR LOCK" lever to the right
to lock the door.