Navpixel NPD0835 User Manual

8.4" ip-68 touch monitors sunlight readable led b/l lcd

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

www.navpixel.com

NPD0835

USER MANUAL

8.4"

IP-68 Touch Monitors

Sunlight Readable LED B/L LCD

(1st Edition 9/8/2008)

All information is subject to change without notice.

8F-2, No.133, Lane 235, Pao-chiao Rd., Hsin-tien City, Taipei County, 231, Taiwan

Tel:+886-2-8919-1858 / Fax:+886-2-8919-1300

Table of Contents

Summary of Contents for Navpixel NPD0835

Page 1: User Manual
NPD0835 USER MANUAL 8.4" IP-68 Touch Monitors Sunlight Readable LED B/L LCD (1st Edition 9/8/2008) All information is subject to change without notice. 8F-2, No.133, Lane 235, Pao-chiao Rd., Hsin-tien City, Taipei County, 231, Taiwan Tel:+886-2-8919-1858 / Fax:+886-2-8919-1300...
Page 2: Record Of Revision
Record of Revision Version and Date Page Old Description New Description Remark Sep.8 2008 Preliminary Release Page 2...
Page 3: Table Of Contents
Table of Content Record of Revision......................2 Table of Content ........................ 3 Usage Notice........................4 1.0 Introduction ......................... 5 2.0 Safety.......................... 6 3.0 Product Care and Maintenance................... 8 4.0 Packaging Contents ....................10 5.0 Cable Connections.....................11 6.0 Installation ......................... 13 7.0 Display Controls ......................
Page 4: Usage Notice
Usage Notice 01. To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. 02. Make sure you turn off and unplug the the display before installing WARNING! devices. Precautions To maximize the life and safe use of your unit, always be sure to follow the warnings, precautions and maintenance recommendations in this user’s guide.
Page 5: Introduction
The NavPixel™NPD0835 sunlight readable monitor handles a wide-range of extreme environments making it the industry choice for mobile applications. Housed in a milled billet aluminum case, the slim-profile NavPixel™NPD0835 is light weight and watertight, with fully sealed IP68 connectors. Front-mounted controls and the touch screen make the industrial rugged monitor user-friendly.
Page 6: Safety
2.0 Safety General Safety Instructions • Before operating the NavPIxel™ NPD0835 Monitor, read this User Manual thoroughly • Keep this User Manual for future use • Verify the computer system capability (see Packaging Contents & Installation) to insure operation of the Monitor •...
Page 7 • Do not disassemble or modify the unit to avoid the possibility of electrical shock, damage to its electrical components or scratching the display surface, and • Disassembly voids the warranty. Servicing – NavPixel™ Qualified Service Personnel may be required if the unit: • Does not operate normally when installation instructions are followed •...
Page 8: Product Care And Maintenance
3.0 Product Care and Maintenance Product Care This NavPixel™ Monitor has been designed to provide optimum performance and service without any required scheduled maintenance other than occasional cleaning. Disconnect the Monitor from the power source before cleaning the Monitor, Touch Screen or unit’s enclosure.
Page 9 Maintenance Power Cord To avoid shock and fire hazards, replaced the unit’s power cord if: WARNING! Insulation becomes damaged, or A loose connection is suspected. Other Maintenance Only Qualified Service Personnel should perform all other maintenance except for cleaning and the power cord replacement described above. Page 9...
Page 10: Packaging Contents
4.0 Packaging Contents The NavPixel™NPD0835 is shipped in a box with PE foam packaging. It is recommended the installer save the box and all packaging materials in case the unit would need to be returned to the Service Center or local dealer. (Figure 1) One NavPixel™...
Page 11: Cable Connections
5.0 Cable Connections 5.1 Cables • The NavPixel™ NPD0835 is packaged with three cables: -USB, VGA and DC Power, #1, #2 and #3 in Figure 2 • The AC Power Adapter is optional. (Figure 3) (Figure 2) (Figure 3) Page 11...
Page 12 5.2 Connectors Connectors are located on the bottom of the unit housing, from left to right: #1 Power, #2 USB Pass-through, and #3 VGA. (Figure 4) Connectors are physically unique to insure the installer makes the proper connections. (Figure 4) VGA Connector •...
Page 13: Installation
6.0 Installation The NavPixel™ NPD0835 is designed to be mounted in two configurations: with a universal ball-and-socket mounting kit, or in a Flat Panel configuration. 6.1 Pedestal Mount The NavPixel™ is designed compatible with a RAM® universal ball-and-socket system mounting kit (Figure 5). By installing the Monitor with this kit, the User can adjust the viewing angle to improve viewability in changing environments.
Page 14 The back of the monitor includes mounting points that you can use to mount the monitor as your installation requires. Mounting holes on the NavPixel™ NPD0835 allow the monitor to be mounted by rear mounted using VESA75 or RAM mount Mounting from rear: VESA75 (4 hole pattern).
Page 15 6.3.2 Step 2 - Connecting the Monitor Computer Display Properties - SVGA or XGA Prior to connecting the NavPixel™ NPD0835 to the computer, connect the computer to a CRT monitor to verify the computer video display properties are set to 800 x 600 (SVGA) pixels or for the 15”...
Page 16 6. Select the Advanced button to go to the next menu to verify the Hz refresh rate 7. Select the Monitor tab 8. Under Monitor Settings, verify the Screen Refresh Rate is set at 60Hz • If so, select the Cancel button and go to step 9 •...
Page 17 Power on the Monitor • Connect the NavPixel™ NPD0835 to the computer • Power up the NavPixel™ NPD0835 • Power up the computer • The Windows Operating System should automatically apply the best generic driver for this connection. Once the monitor is mounted in place and connect it to the computer (or other video source) and the regulated DC power supply successfully.
Page 18 6.3.3 Step 3 - IRtouch Software Installation IMPORTANT – Do not plug in the touchscreen yet! Install the driver first. Run IRtouch driver setup 2. Accept user agreement Install in default location Page 18...
Page 19 5. Click continue, you can trust IRtouch 6. Click on Finish Attach the NavPixel™ NPD0835 monitor to the system or install the computer to a docking station. Attach the USB cable. After the USB cable from the monitor is attached to the computer it will recognize the touchscreen for the fi i rst time.
Page 20 7. Continue 8. Click Finish 9. Click the IRtouch icon located on your desktop to calibrate the touch monitor. 10. Click Calibrate Page 20...
Page 21 11. Set Modes When used in rugged environments with software written for touchscreens, you may find it easier to use the ‘click on release’ radio button. 12. Beep You can set the computer to beep on touch activation if needed. Page 21...
Page 22: Display Controls
7.0 Display Controls 6.1 Membrane Control Button POWER SWITCH: Pushing the power switch will turn the monitor on. Pushing it again to turn the monitor off. Power LED: Power ON-Green / Power off-No. Up Key >: Increase item number or value of the selected item. Menu Key: Enter to the OSD adjustment menu.
Page 23: Osd Menu & Screen Adjustment
8.0 OSD Menu & Screen Adjustment Main Menu Here are some instructions for you to use the OSD (On Screen Display). By pressing the “menu”, you will see the below picture. Timing shows resolution, H-frequency, and V-frequency of the panel. Version shows the firmware control version.
Page 24 Press ’menu’’ once, you can adjust min. luminance to to set the lowest level of brightness for light sensor. (optional) Contrast: Press “menu” and “right” you can adjust the contrast from “0” to “100” by pressing the “left” and “right”. Exit: You can exit this sub menu back to normal screen.
Page 25 Color Tempture: You can have 3 options in this selection. Color Tempture User Color Tempture_6500K Color Tempture_93OOK “user mode”, “6500K” (Warm color scheme), “9300K (Cold color scheme). Default is “user”, and inside all “R”, “G”, and “B” are set “100” Exit: back to the normal screen.
Page 26 Clock: If you are not satisfied about the Autotune result, you can adjust manually by “Clock”. The screen will be “wider” if you adjust this function. Phase: If you see “double image” on characters, you can adjust “Phase” to make it perfect image. Hpos: You can shift the screen horizontally by this function.
Page 27 Osd_VPos: You can move the OSD Vertically over the screen. Exit: back to main menu. Factory_Reset: By pressing this, the screen will be back to the factory setting on very beginning and lost all the personal settings. Sharpness: You can make the characters looks sharper. Dos_mode/Gxf_mode: Some old programs running over 640x400 and 720x400 (DOS Mode and graphics mode), you need to select this option manually.
Page 28: Video Input Pin Assignment
9.0 Video Input Pin Assignment The following picture provides the connection outline Video Input Pin Assignment This section describes the pin assignment of the LCD’s video connector. It is called 15pin Mini D-sub connector. Pin No. Signal Connector Red Video Signal Green Video Signal Blue Video Signal N.C.
Page 29: Display Timing
10.0 Display Timing 10.1 Applicable video timing The following table lists the better display quality modes that the LCD monitor provides. If the other video modes are input, the monitor will stop working or display unsatisfactory picture quality. TIMMING MODE RESOLUTION 640x480@60Hz 640x480@72Hz...
Page 30: Display Outline Dimensions
11.0 Display Outline Dimensions Unit: mm Page 30...