Reference Manual for the NETGEAR ProSafe VPN Client
Configure the Connection Security Policy
5.
In this step, you will provide the authentication (IKE Phase 1) settings, and the key exchange
(Phase 2) settings. The setting choices in this procedure follow the VPNC guidelines.
Figure D-13: Connection Security Policy Authentication (Phase 1)
Configure the Authentication (Phase 1) Settings.
a.
•
Expand the Security Policy heading, then expand the Authentication (Phase 1)
heading, and click on Proposal 1.
•
For this example, assure that the following settings are configured:
–
In the Encrypt Alg menu, select Triple DES.
–
In the Hash Alg, select SHA-1.
–
In the SA Life, select Unspecified.
–
In the Key Group menu, select Diffie-Hellman Group 2.
D-12
NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
202-10015-01