Mrp Port Settings - NETGEAR GS724T Administration Manual

5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
6. If you make any changes to the page, click Apply to apply the change to the system.

MRP Port Settings

Use the MRP Port Settings page to configure the per-port MRP mode and timer settings. The
timers control when and how often various messages are transmitted on each interface.
To access the Port Settings page click Switching> MRP > Advanced > Port Settings in the
navigation tree. In the following image, the MMRP mode on ports g4 and g5 is being enabled.
To configure the MRP port parameters:
1. Select the check box next to the port to configure. You can select multiple ports to apply
the same settings to the selected interfaces. Select the check box in the heading row to
apply the same settings to all interfaces.
2. Configure the following MRP port settings:
a. Enable or disable MMRP on the interface. The default mode is Disable.
b. Enable or disable MSRP on the interface. The default mode is Disable.
GS716T and GS724T Gigabit Smart Switches
Ethernet Audio Video
8