A USB keyboard is required to change system settings. (not included) Mounting and Installation ® ™ The Planar ContentSmart MP-3450 media player can be attached to mounting posts on the back of screens or inside cabinetry with the built- in VESA MIS-D100 (100mmx100mm) compatible mounting flange.
Page 2
Port connections Video input connection The AV in port lets you attach TV tuners, live video camera signals, pre-recorded videos, and more via the 3.5mm composite video/audio cable. NTSC/PAL mode is selected automatically. Also refer to your software documentation to enable display. System setup ATTACH a video cable (either VGA or HDMI) to your display and the appropriate port on the media player.
Page 3
SET your display to the correct input mode (VGA/HDMI) → You should see the player boot up screen. WAIT while player boots up (up to 60 seconds) → once you see “Welcome” on screen, the unit is ready for content update or menu configuration.
Content Management Please consult the software documentation for information specific to your management solution. Troubleshooting Why is there no video output on composite video connectors? The player outputs video over HDMI and VGA by default. To switch to composite video output, connect a HDMI or VGA display, then select PAL or NTSC output from the menu system (see System setup).