Windows 2000 - Panasonic CF-T2 Series Operating Instructions Manual

First-time Operation
14

Windows 2000

CAUTION
Do not press any keys or touch the touch pad until [Windows 2000 Profes-
sional Setup] is displayed.
1 At [Welcome to the Windows 2000 Setup Wizard], select [Next].
2 After reading the agreement, select [I accept this agreement] or [I don't accept this
agreement], then select [Next].
NOTE
If [I don't accept this agreement] is selected, the Windows setup will be
aborted.
3 Select settings for your region, then select [Next].
4 Enter your name and organization and then select [Next].
5 Enter your computer name and administrator password and then select [Next].
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated.
Enter the correct date, time and the time zone, then select [Next].
6
At [Networking Settings], select [Typical settings], then select [Next].
7
At [Workgroup or Computer Domain], select [No, this computer is not on a
8
network, or is on a network without a domain], then select [Next].
The computer will restart.
9 At [Welcome to the Network Identification Wizard], select [Next].
At [Users of This Computer], select [Users must enter a user name and pass-
10
word to use this computer], then select [Next].
Select [Finish].
11
Enter your administrator password and select [OK].
12
<Only for models with touchscreen>
If the cursor can not be pointed correctly with the stylus, perform [Calibration] in
[Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen].
NOTE
If you use the wireless LAN, be sure to refer to the Reference Manual's "Wire-
less LAN".
This concludes the first-time use operation guidelines.