Table of Contents
Advertisement
F
OPTIMAL OPERATION
To achieve optimal performance, please note the following:
•
Adjust the air flow direction correctly so that it is not directly directed to people.
•
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive tem-
perature levels.
•
Close doors and windows otherwise the desired effect may be reduced.
•
Use TIMER ON button on the remote controller to select a time you want to start your air conditioner.
•
Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner may be redu-
ced and the air conditioner may stop running. Make sure there are no obstacles blocking the airflow.
The air stream must be allowed to reach the entire room unhindered. Also the air stream must be allo-
wed to reach the air conditioner unhindered.
•
Clean the air filter periodically, otherwise cooling or heating performance may be reduced. It is advi-
sed to clean the filters every two weeks.
•
Do not operate unit with horizontal louvre in closed position.
G
ADJUSTING AIR FLOW DIRECTION
Lever
fig. 8
•
Adjust the air flow direction properly otherwise, it might cause discomfort
or cause uneven room temperatures.
•
Adjust the horizontal louver using button
•
Adjust the vertical louver manually.
Adjusting the horizontal Air Flow Direction (up - down)
The air conditioner automatically adjusts the horizontal air flow direction in accor-
dance with the operating mode.
To set the horizontal air flow direction
Perform this function while the unit is in operation. Keep pressing the AIR DIRECTI-
ON button
on the remote controller to move the louver to the desired direction.
•
Adjust the horizontal air flow direction to the desired direction.
•
In subsequent operations, the horizontal air flow is automatically set in the
direction to which you adjusted the louver by pressing the AIR DIRECTION
button.
To set the vertical air flow direction (left - right)
Adjust the vertical louver manually using the lever on the left or right side of the
vertical louver arm (depending on model). When the air conditioner is in opera-
tion and the vertical louver is in a specific position, move the lever at left (or right,
depending on model) end of the air outlet to the desired position.
on the remote controller.
4
123
Hide quick links:
Advertisement
Table of Contents
