Motorola STARLINE SERIES Installation And Operation Manual page 2

These servicing instructions are for use by qualified personnel only. To reduce the risk of electrical shock, do not perform any servicing other than
that contained in the Installation and Troubleshooting Instructions unless you are qualified to do so. Refer all servicing to qualified service
personnel.
This symbol indicates that dangerous voltage levels are present within the equipment. These voltages are not
insulated and may be of sufficient strength to cause serious bodily injury when touched. The symbol may also
appear on schematics.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important
installation, servicing, and operating instructions in the documents accompanying the equipment.
For continued protection against fire, replace all fuses only with fuses having the same electrical ratings marked
at the location of the fuse.
Electrostatic discharge (ESD) can damage the MB*/* unit and circuit card assemblies. Wear an antistatic wrist
strap attached to a chassis ground to prevent ESD damage.
This equipment operates over the marked Voltage and Frequency range without requiring manual setting of any selector
switches. Different types of line cord sets may be used for connections to the mains supply circuit and should comply
with the electrical code requirements of the country of use.
It is recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected. This is to avoid damaging the
equipment by local lightning strikes and other electrical surges.
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Caution
Special Symbols That Might Appear on the Equipment