End Of The Programme - Zanussi TA 1050 Instruction Book

4.2.8. End of the programme

When the chosen programme is over, the washing machine
stops automatically and the programme selector stays on
the stop « » or «rinse hold
The programmes end :
• by a spinning or a draining (for all the washing program-
mes) by selecting the wanted position on the spinning
speed variator (if you have not pressed the «rinse hold»
pushbutton).
• by a rinse hold (for all the washing programmes) if you
have selected the «rinse hold
finish these programmes by a spinning by selecting the
wanted position on the spinning speed variator and
releasing the «rinse hold
At the end of the cycle, allow the On/Off
to come out to switch the washing machine off. Release any
other pushbuttons that are pressed in. Pull out the electricity
plug and close the water supply tap.
Note: we recommend that you should leave the cover and
the drum open after use to air the washing drum.
» position.
» pushbutton. You can
» pushbutton.
« »
pushbutton
4