The Control Panel; How To Do A Wash; End Of The Programme - Zanussi T 732 Instruction Book

Washing machine t 732
Table of Contents

Advertisement

4. USING

4.1. The control panel

1 - On/Off pushbutton
2 - Half load pushbutton
3 - Rinse hold pushbutton
1 2 3

4.2. How to do a wash ?

Before the first wash in your washing machine, we recom-
mend that you should do a preliminary wash at 90°C with de-
tergent but without any washing to clean the tub.
4.2.1. Loading the washing
Lift the machine cover.
Open the drum by pressing on the locking button A; the
two flaps automatically separate.
Insert the washing, close the drum and the cover of your
washing machine.
A
4.2.2. Proportioning of detergents
Your washing machine was designed to reduce water and
detergent consumption, therefore reduce the doses recom-
mended by detergent manufacturers.
Pour the powder detergent dose into the wash compartment
and into the prewash compartment
«prewash» option. Pour in the softener into the
ment if you wish.
If you are using a different type of detergent, refer to the «de-
tergents and additives» section in the washing guide.
4.2.3. Choice of the temperature
Choose the wash temperature applicable for the selected
program (using the information given in the programs table)
and comply with the temperature shown on the care label for
each article to be washed (see the washing guide).
Warning : before you close the
cover of your washing machine,
make sure that the drum door is
properly closed:
•the two flaps latched together,
•the locking button A extended.
if you chose the
4 - Program selector
5 - Temperature selector
4
4.2.4. Choice of the pushbuttons
Press the chosen pushbuttons.
4.2.4.1. «Half load» pushbutton
This pushbutton allows to wash small quantity of linen not
much soiled (max. 2,5 kg) on cotton programmes only by re-
ducing the water quantity during rinsings.
4.2.4.2.«Rinse hold» pushbutton
If you use this pushbutton, the tub remains full of water at the
end of the last rinse to prevent the washing from becoming
creased if it is not taken out of the drum as soon as the
washing machine is stopped.
4.2.5. On/off pushbutton
To switch on your appliance, press this pushbutton. The
control lamp lights on.
4.2.6. Choice of the programme
Select the program depending on the nature and the degree
of soil of the laundry.
Turn the program selector clockwise to select the chosen
programme.
4.2.7. Starting the program
After you choose the washing program, press the «On/Off»
compart-
pushbutton to start the cycle.

4.3. End of the programme

When the chosen programme is over, the washing machine
stops automatically and the programme selector stays on
the stop «I» or «rinse hold» position.
The programmes end :
by a spinning (for all the washing programmes) if you
have not pressed the «rinse hold» pushbutton.
3
5

Advertisement

Table of Contents
loading

Table of Contents