Charging The Keyboard; Pairing The Keyboard - Belkin Keyboard Folio Quick Install Manual

Keyboard Folio

Charging the Keyboard

The Keyboard Folio contains an internal battery that is charged using the supplied USB to
USB-Micro cable. Connect the USB end to an appropriate USB power source (e.g., laptop,
desktop, USB wall charger, etc.). Connect the micro-USB end into the Keyboard Folio. When
the keyboard is plugged into a USB source, the Charge Status amber LED comes ON for
about 30 seconds and stays ON for as long as the battery is charging. When the battery is
fully charged, the Charge Status amber LED turns OFF.
The Keyboard Folio has been designed to be operational even when the battery is empty, as
long as it is connected via the USB to USB-Micro cable to an appropriate USB power source.
While it is charging, the Keyboard Folio will be fully operational whether the switch is set to an
on or off position.

Pairing the Keyboard

The Keyboard Folio connects to your tablet via Bluetooth technology.
Before using the Keyboard Folio, you must first pair it with your Bluetooth wireless-
technology-enabled tablet. Pairing is necessary for two Bluetooth devices to connect to each
other wirelessly. After creating a paired link, you do not need to repeat the pairing process; the
Keyboard Folio automatically links to the tablet when both devices are switched on. Pairing
must be performed every time you want to use the Keyboard Folio with a different tablet. If the
Keyboard Folio is not paired, the status LED will flash blue.