The Control Panel And Programmes - Zanussi DCS 383 Instruction Booklet

The control panel and programmes

All figures are nominal and vary for example due to temperature variations on the inlet water.
The figures apply to washing up 5 IEC-settings.
1 On/Off-button
Press the button in order to start the required
programme.
2 Temperature selector
Press the button in for 55°C.
3 Temperature selector
Press the button in for 65°C.
4 Programme selector
Turn the programme selector clockwise to the
programme required and press in the On/Off button.
During the water heating process, the timer is stan-
ding still. To isolate the dishwasher from the mains
completely, unplug it from the wall socket.
5 Indicator lamp
While the programme is in progress, the operating
lamp is lit and it goes out when the programme is ready.
1 2 3 5
Door lock
Press the handle down and open the door. Avoid opening
the door while the machine is running. If the door is opened
and is put standing ajar after a completed programme the
dishes will dry faster.
Programmes
Prerinse is used if you want to wait until you have a full
load. This cycle rinses the load and keeps it moist, making
the main wash easier later on. No detergent should be used.
It does not matter which temperature you select.
Intensive for loads which have heavily dried-on food rem-
nants and for those which are heavily soiled.
Normal for normal soiled loads, which do not need any
rinse off.
Rinse for warm or hot rinsing for dishes (65°C) or
glasses (55°C).
Plate warming is used for warming dinner plates etc.
prior to serving a meal.
- 8 -
4