Nokia MW1122 Administrator's Manual page 105

MW1122 Administrator Manual
Command
Description
Syntax
Arguments
Example
MW1122(conf)#wlan slave-to-eth
MW1122(conf)#
Command
Description
Syntax
Arguments
Example
MW1122(conf-wlan)#bridging
MW1122(conf-wlan)#
Command
Description
Syntax
Arguments
Example
MW1122(conf-wlan)#ip address 192.168.132.12
255.255.255.0
MW1122(conf-wlan)#
5-70
Set wireless LAN interface slave to Ethernet inter-
face
This command makes the wireless LAN interface slave
to Ethernet interface. In this case you do not have to
assign an IP address to the wireless LAN interface. The
IP address of the Ethernet interface serves also as an
IP address to the wireless LAN interface. Note that you
must issue this command on the root level of the con-
figuration mode.
[no] wlan slave-to-eth
None.
Switch on/off bridging
Switches of bridging at the WLAN interface.
[no] bridging
no switches bridging off.
Switch on/off IP function in wireless LAN interface
Switches on/off IP function in the Wlan interface.
[no] ip address <ip-address> <ip-mask>
no switches IP function off.
ip-address is the IP address you want to assign to
the wireless LAN interface.
ip-mask is the subnet mask.
E Copyright Nokia Networks Oy
C33902001SE_00