Advertisement
AK-HCU200
Camera Control Unit (CCU)
Allows a High-Quality, Uncompressed, Long-Distance Optical Fiber Transmission
Camera System to Be Configured at Low Cost
High-Definition, Long-Distance,
Optical Digital Transmission
By connecting the CCU and the
AK-HC3800 Studio Handy Camera by
optical fiber cable, uncompressed digital
signals can be transmitted with high quality.
The cable between the camera and the
CCU can be extended up to approximately
1,200 m (1,312 yards).*
1
*1: When power is supplied from the CCU.
HD Multi-Format Supported
The AK-HCU200 is 59.94 Hz/50 Hz
switchable, and supports 1080/59.94i,
1080/50i, 1080/29.97PsF,*
1080/25PsF,*
2
1080/23.98PsF,*
720/59.94p, and 720/50p
2
HD formats.
*2: The 1080/29.97PsF, 1080/25PsF and 1080/23.98PsF
formats must be selected at the camera.
Prompter Supported
Two SDI channels and one VBS channel are
provided for RET input, and prompter input
(analog video signal input) is included as
standard. Prompt signals input to the CCU
can be output from the prompter terminal
on the camera side.
HD/SD Simultaneous Operation
Two SDI OUT and two SDI OUT (PM) lines
are provided. In addition to HD video signal
output, SD downconverted video signal
output (SDI, analog composite) comes as
standard. SD monitoring is also possible.
IP Connection Camera Remote
Multiple AK-HRP200G Remote Operation
Panels and up to 19 AK-HCU200 Camera
System Configuration and Interface
AJ-MC700P
Microphone
AJ-HVF21KG
AJ-CVF100G
EVF
*
1
2/3-type HD Lens
AK-HC3800
Studio Handy Camera
Lens operation
system accessories
SD memory card
3
AK-HCU200P/HCU200E (Tajimi connector model)
AK-HCU200PS/HCU200ES (LEMO connector model)
Control Units can be routed through a hub
with IP connection. Camera control units on
a LAN can be freely controlled by the
remote operation panels for highly versatile
operation.
Compatibility with ROP/MSU
The AK-HRP935 Remote Operation Panel or
AK-MSU935 Master Setup Unit can also be
used for serial remote control of the
AK-HCU200 camera control unit.*
*3: Only functions that are supported by the CCU can be
controlled by the AK-MSU935 or AK-HRP935.
2U Rack Mounting Size
2
The 2U height of this compact, lightweight
unit allows 2U rack mounting.
AK-HCU200 front panel and rear panel
AK-HVF70G
17.8cm (7 inches) LCD Color Viewfinder
Income
Headphone
PROMPTER OUT
Optical fiber multi cable
Max. 1,200 m / 1,312 yards
DC IN
DC OUT
DC12 V (max. 1 A)
SHAN-TM700
Tripod Adapter
SD memory card
*1: Panasonic recommends the use of CAC-compatible lenses recommended by each manufacturer.
Pedestal System
Setting Up CCU with a PC
When connecting a CCU and PC by IP
connection, the CCU set-up menu can be
displayed and changed on the PC's web
browser.
Bar ID Display Output
Text can be superimposed onto the color
bar output signal. Displaying the video
source and other information in this way is
convenient during system set-up and
3
standby.
SD Memory Cards Supported
The SD memory card slot allows CCU
setting data to be saved on an SD memory
card. Firmware updates can also be
handled by SD memory card.
G/L
ROP Cable (Option)
AK-HCU200
Max. 50 m / 164 feet
Camera Control Unit
ETHER NET
*
2
ETHER NET (Cross)
Income
Headphone
Master Setup Unit (MSU)
Wave monitor
Picture monitor
(HD/SD SDI)
Picture monitor
(Analog SD)
HD/SD SDI OUT
RETURN IN
PROMPTER IN
SD memory card
AK-HRP200G
*
2
Remote Operation Panel
HUB
MSU
PC
*2 AK-HRP200G require external power supply.
Advertisement
