Use; Control Panel; Controls - Zanussi FL 808 Instruction Booklet

Use

Control panel

1 Detergent dispenser Drawer
2 Spin speed selector dial
This dial allows you to select the spin speed or the
following options:
= no spin. All the spinning phases are
G G
suppressed. To be used for items that tend to
wrinkle. If selected on programmes A and B the
machine will perform an extra rinse (4 instead of 3).
= anti-crease (water in tub). The water of the
G G
last rinse is not emptied out to avoid any
creasing in the laundry.
The spin speeds on the dial refer to cottons.
For delicates, position 800 or 1000 corresponds to
650 rpm, for synthetics and wool to 850 rpm (800
rpm for model FL 808). Position 450 corresponds to
450 rpm for synthetics and wool and 350 rpm for
delicates.
3 Mains-on light
It comes on when the machine starts operating and
goes out by depressing ON/OFF button to switch the
machine off.
4 On/Off button
Press this button to start the machine. The same
button is used to switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the On/Off button.
5 Quick wash button
By depressing this button on cotton and synthetics
programmes the washing time will be reduced by
approx. 30 mins for cotton from COLD
and by 15 mins for synthetics.
Max. recommended temperature 60°C.
To be used for lightly soiled laundry.
6 Temperature selector dial
(thermostat)
To select the washing temperature turn the dial to
the required value.
When your laundry is only lightly soiled, a cold wash
can be used (dial to position
7 Programme selector dial
To select the required washing programme turn the
dial clockwise.
10
to 60°C
).