Table of Contents
Advertisement
Nothing Prints (part 2)
Check your computer.
CHECK8
Is there enough computer memory or hard
disk space?
To use this printer, you must have an adequate amount
of hard disk space. If there is insufficient hard disk
space, delete unnecessary files to increase the free
space of the hard disk. If there is insufficient memory,
close unnecessary applications to increase memory
available for printing. If you are still unable to print,
install more memory into your computer.
CHECK9
Is your printer selected correctly in the
current application for the print job?
When choosing "Print" from the "File" menu located in
applications, be sure you have selected the "SHARP
AJ-1805" or "SHARP AJ-2005" displayed in the
"Print" dialog box.
Check here
If your operating system is Windows 2000, make sure
that either of "SHARP AJ-1805" or "SHARP AJ-2005"
printer driver icon is selected as the current printer.
How to Use the
Printer Properties
Online Manual
CHECK10
CHECK11
Print Status
Print
Window
Has the printer driver been installed
properly?
Check if the printer driver has been installed, following
the steps listed below.
1 1 1 1
Click the "Start" button, select "Settings" and then click
"Printers".
2 2 2 2
Check if the "SHARP AJ-1805" or "SHARP AJ-2005"
printer driver icon is shown in the "Printers" window.
If you still cannot print after confirming the "SHARP AJ-
1805" or "SHARP AJ-2005" printer driver icon, the printer
driver may not have been installed correctly. In this case,
you must uninstall the printer driver and install the printer
driver again.
Reference:
Uninstalling the Printer Driver
Is the parallel port (LPT) of your computer
set to "bidirectional" (when connected
through the parallel port)?
Check the current port setting, referring to the
operation manual of your computer. The unit does not
work normally when the setting is not bidirectional.
Sharing Printer
Maintenance
Troubleshooting
53
Troubleshooting
Advertisement
Table of Contents
