Use; Control Panel; Controls - Zanussi WDS872C Instruction Booklet

Control panel

1
1 Detergent dispenser drawer
2 Temperature selector dial
Turn this dial clockwise or anti-clockwise to
select the required temperature.
Position means that the machine will wash
with cold water.
3 Half load button
Select this button to reduce water consumption
on the rinse cycle when washing a half load of
cottons or linens (2.5 kg).
The machine will carry out 4 rinses instead of 5
on programmes A-B-C-D and 3 rinses instead of
4 on programme F.
4 Spin suppression button
By depressing this button all the spinning phases
are suppressed.
To be used for delicate cotton items.
This button is not compatible with the NON-
STOP programme washing + drying.
5 Drying pilot light
It illuminates when drying starts.
8

USE

2 3 4 5
6 Drying time selector dial
Graduated up to 140 minutes for cotton and
synthetics, allows drying time to be selected
according to the type and amount of laundry and
the required degree of dryness.
Turn the dial clockwise only.
Cooling phase
To allow the laundry to cool down, a cooling
phase starts automatically 10 minutes before the
end of drying and this phase must in no
circumstances be reduced or interrupted.
7 Operating pilot light
This light illuminates when the machine starts
operating and goes out by depressing the
programme selector dial.
8 Programme selector dial/ON-OFF
switch
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
Pull the dial outwards to start the programme,
push the dial in to switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the programme
selector dial.
6 8
7