Table of Contents
Advertisement
•
Ensemble name
•
Frequency
•
Signal error rate
•
Bitrate codec
•
Time
•
Date
Use DAB menus
1
In DAB mode, press MENU to access the
DAB menus.
2
Turn the
knob to toggle through the
menus.
Tune to a stored station
1
Press the
knob to access the list of
stored stations.
•
If no DAB station is stored, the product
starts automatic search.
2
Turn the
knob to select a station.
3
Press the
knob to start listening.
Re-scan for stations
Full scan is used to perform a wide range
search for DAB radio stations.
Press the
knob to start scanning for available
DAB stations.
» After the scanning is complete, the first
detected station is broadcast.
EN
14
Tune to a station manually
With this feature, you can tune to a specific
channel/frequency manually. In addition to
antenna orientation for better radio reception,
the optimal reception can also be obtained with
this feature.
1
Press the
knob to access the station list.
2
Turn the
knob to select a station from
5A to 13F.
3
Press the
knob to confirm the option.
DRC (Dynamic Range Control)
DRC adds or removes a degree of
compensation for the differences in the dynamic
range between radio stations.
1
Press the
knob to access the sub-
menus.
2
Turn the
knob to select an option. (The
asterisk behind the option indicates the
current setting.)
•
: No compensation applied.
•
: Medium compensation
applied.
•
applied.
3
Press the
knob to confirm the option.
: Maximum compensation
Advertisement
Table of Contents
