Privacy Override - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Change to Tone Dialing:
1. Dial a telephone number on a
CO line programmed for
rotary dial pulses.
2. While the call is in progress,
press the Tone Dial Select
button.
To Override a Call:
1. Press a busy Line button.
Although the CO line is programmed for rotary dial pulses, access the
CO line and dial the telephone number like any other call described in
this user guide.
After you press the button, the Tone Dial Select LED will light steady red,
and you will be able to send DTMF tones with your dialpad.
If the LED is off, tone dialing is not selected and you will not be able to
send DTMF tones.
NOTE: When originating or receiving a new CO line call, the system will
automatically place the line in the dial pulse mode.

PRIVACY OVERRIDE

This optional feature allows you to enter an established call on a private
common CO line button. Up to two station users may enter an existing
CO line-to-station call (allowing up to three stations to be connected to a
CO line). To access this feature, your station must be assigned with
Privacy Override in system programming, or the station that is already
connected to the CO line must be in the Privacy Release mode.
You will now be connected to the CO line, and will be able to participate
in the conversation.
An optional tone signal may be heard by the connected parties before
you enter the conversation.
NOTE: Station users with a Privacy Release button can allow stations to
enter their conversations on common Line buttons, even if the station
entering the conversation is not programmed for Privacy Override.
FEATURE OPERATION
2-13