Related Manuals for Fishman PREFIX PREMIUM
Summary of Contents for Fishman PREFIX PREMIUM
- Page 1 USER GUIDE PREFIX PREMIUM STEREO ONBOARD BLENDER...
- Page 2 Welcome Thank you for making Fishman a part of your acoustic experience. We are proud to offer you the fi nest acoustic amplifi cation products available; high-quality professional-grade tools to empower you to sound your very best. We are confi dent Prefi x Premium Stereo Onboard Blender will both enhance and inspire...
-
Page 3: Quick Start
Quick Start Before you begin, set the controls as shown: 1. Plug in • Use a ¼-inch instrument cable. 2. T une up • Press the Tuner button. When engaged, Tuner mutes the output. Press again to exit Tuner. 3. Turn up • Raise the Volume and adjust the Blend control to your liking. - Page 4 Controls Volume • For the cleanest signal, set the Volume knob as high as possible, without causing distortion or feedback. Blend • Move the Blend slider to change the balance between the pickup and the microphone. Bass • Boost here to add depth and weight to the sound of the guitar. Note that this control only affects the pickup signal.
- Page 5 Phase • Use the Phase switch to improve bass response at low volume and suppress feedback at high volume. If feedback occurs, push the Phase switch. If feedback recurs when you change your location, press the switch again.
- Page 6 Tuner Depress the Tuner button to turn the circuit on and off. This digital chromatic tuner accommodates all standard and alternate tunings and mutes the output when engaged. It can be activated without an instrument cable connected, in which case it will turn itself off after three minutes. Note that the tuner is calibrated to A = 440.
- Page 7 Power Plug in the guitar, and the Prefi x Premium S-O-B switches on. The Battery LED will fl ash once at power-up to tell you the preamp is on. Low Battery Indicator When the Battery indicator lights steadily, it is time to change the battery. To conserve power, unplug the instrument and turn off the tuner when not in use.
-
Page 8: Sample Settings
Sample Settings Fingerstyle “Scooped” Mid This will add fullness to the bass This setting emphasizes extreme bass and defi nition to the treble. and treble... -
Page 9: Stereo Operation
Stereo Operation A small switch, located on the side of the preamp, let’s you choose between mono and stereo operation. Factory preset to mono, you use the onboard controls to affect your mic and pickup sound and connect to your amplifi er or PA with a standard guitar cable If you wish to split the pickup and microphone signals for separate external processing, move this switch to stereo and connect to your amplifi... - Page 10 Microphone Trim Adjustment The microphone and pickup levels are preset at the factory and do not require adjustment. However, a microphone trim control may be adjusted to alter the microphone and pickup balance. Set the Blend slider to the center position and adjust the trim control as necessary.
-
Page 11: Electrical Specifications
Electrical Specifi cations Nominal Input Level: -20dBV Input Impedance: 20MOhm Output Impedance: Less than 3.5kOhm Nominal Output Level: -12dBV THD: Less than .04 %, -20dBV input Noise Floor: -97dB Dynamic Range: 102dB Battery Life: 100hrs. (tuner off) Notch Filter Range: 30Hz –... - Page 12 www.fi shman.com 513-000-023 Rev B 9-08...