Yamaha SUV1200 WaveRunner 2004 Owner's/Operator's Manual page 29

1 Engine shut-off cord (lanyard)
Attach to wrist so that the engine stops if the
operator falls off the watercraft.
2 Engine stop switch
Push to stop the engine normally.
3 Clip
Insert into the engine shut-off switch to enable
starting of the engine.
Remove to stop the engine or prevent acci-
dental starting of the engine or unauthorized
use of the watercraft.
4 Engine shut-off switch
Remove the clip to stop the engine and dis-
able it from starting.
5 Quick Shift Trim System (QSTS) selector
Use to select the trim angle of the watercraft.
6 Start switch
Push to start the engine.
7 Adjustable rearview mirrors
8 Multifunction meter
Use to check watercraft operation.
9 Shift lever
Use to put the watercraft into forward or
reverse.
0 Throttle lever
Use to accelerate and decelerate.
A Cleat
Use to attach a towrope for pulling a water-
skier.
B Stern eyes
Use to attach rope for transporting or mooring.
C Deck drain outlets
Drains water from the footwell.
D Stern drain plugs
Use to drain water in the bilge when the water-
craft is on dry land.
E Jet thrust nozzle
Changes the direction of jet thrust according
to handlebar position.
F Reverse gate
Controls direction of jet thrust when in reverse.
G Ride plate
2-2
E