Checking The Battery - Yamaha GP1300R WaveRunner 2008 Owner's/Operator's Manual

Maintenance and care
Steering cable (handlebar end)
G
Steering cable (jet thrust nozzle end)
G
QSTS cable (jet thrust nozzle end)
G
QSTS cables (pulley end)
G
75
QSTS cables (handlebar end)
G
Remove the QSTS cable housing. Spray a
rust inhibitor into the outer cables. Reinstall
the QSTS cable housing.
Intermediate housing
G
Fill the intermediate housing with water-re-
sistant grease through the grease nipple
using a grease gun.
Grease quantity:
Initial 10 hours or 1 month:
33.0–35.0 cm³ (1.12–1.18 US oz)
(1.16–1.23 Imp.oz)
Every 100 hours or 12 months:
6.0–8.0 cm³ (0.20–0.27 US oz)
(0.21–0.28 Imp.oz)
EJU34451

Checking the battery

Check the level of the battery electrolyte and
make sure that the negative (–) and positive
(+) battery leads are tightened securely.