Door Reversal - Zanussi ZK 56/38 RF Instruction Booklet

Door reversal directions
1. Disconnect from the electricity supply.
2. Remove all loose items, including food, store
food in a cool place.
3. Gently lay the fridge/freezer on its back with the
top held away from the floor by 5-8 cm (2-3
inches) of packing.
4. Remove the ventilation grill (D).
5. Remove bottom hinge (E).
6. Remove the freezer door by releasing it from the
middle hinge (H).
7. Unscrew the middle hinge.
8. Slide out the fridge door from pin (G), unscrew
the latter and then screw it down into the hinge
provided on the opposite side, after having
removed the small plugs (I) which should then be
fitted on the opposite side.
9. Refit the fridge door and replace the middle hinge
to the left hand side.
10.Replace the fridge door.
11. Screw down the bottom hinge (E) on the opposite
side by using the screws previously removed..
12.Remove the plug (F) from the ventilation grill (D)
and replace it on the opposite side.
13.Re-assemble the ventilation grill (D).
Attention
After reversing the door check that the gasket is
sealing correctly to the cabinet. If the gasket is not
sealing correctly, apply warm air to the non-sealing
area using a hair dryer set to gentle heat.
This will make the rubber more supple and allow it to
revert to its original shape and seal correctly.
18
E
F
D
F
H
I
I
I
F
F
G